*******************************************************************************

                       CAC CA-13 "Boomerang"

                                 by Kazunori Ito

*******************************************************************************

1.Description of this aircraft
2.Specification
3.About the installation
4.About the operations
5.About free software
6.About the directions point in FS2004 and FSX

*******************************************************************************

The CAC Boomerang was a World War II fighter aircraft designed and manufactured in Australia between 1942 and 1945. 
The Commonwealth Aircraft Corporation produced Boomerangs under the production contract numbers CA-12, CA-13, CA-14 and CA-19, with aircraft supplied under each subsequent contract incorporating modifications and improvements. 
The Boomerang is significant as the first combat aircraft designed and built in Australia.
--------------------------------------------------
2. [ Specification ]

Length: 25 ft 6 in (7.77 m)
Wingspan: 36 ft 0 in (10.97 m)
Height: 9 ft 7 in (2.92 m)
Wing area: 225 Sqft (20.9 m2)
Empty weight: 5,373 lb (2,437 kg)
Loaded weight: 7,699 lb (3,492 kg)

Powerplant: 1 ~ Pratt & Whitney R-1830 Twin Wasp radial engine, 1,200 hp (895 kW)

Maximum speed: 305 mph (265 knots, 491 km/h) at 15,500 ft (4,730 m)
Range: 930 mi (810 nm, 1,500 km)
Service ceiling: 29,000 ft (8,800 m)
Rate of climb: 2,940 ft/min (14.9 m/s)
Wing loading: 34.2 lb/ft2 (167.1 kg/m2)
Power/mass: 0.16 hp/lb (256 W/kg)

Guns: 2~ 20 mm (0.787 in) Hispano or CAC cannons
      4~ 0.303 in (7.7 mm) Browning machine guns
Bombs: Could be fitted when the large drop tank was not carried

Crew: 1

------------------------------------------------- 
3. [ About the installation ]

 The airframe must copy the \CA-13 Boomerang folder as it is in the Aircraft folder of FS2002 or FS2004. 

     \FS2002(FS2004)
        -----\Aircraft
          ---------\CA-13 Boomerang

Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004. 
 A general gauge is saved for the gauge bundled this time. 
 The gauges of GPS are not bundled. 
 Please setup it by yourself.

-----------------------------------------------------------
4. [ About the operations ]

 Shift+"E" = Canopy Open/Shut

  Spesial Key operation

 Shift+Ctrl+"C" = Cowl Flap Shut
 Shift+Ctrl+"V" = Cowl Flap Open

-----------------------------------------------------------
5. [ About free software ]

 All aircraft that I made are free software. 
 The reprint and the repaint may go freely. 
 However, please defend the following conditions. 

     1.The change in contents of this file is prohibited. 
         (Please distribute it like the Zip file of the current state when distributing it. )
     2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model. 
       and don't covert my airframe for CFS Series.
     3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public. 
         (Please open only the texture to the public. )
     4.Don't use DXT format for making texture.
       Please make it by the format that everyone can change. 
       It is necessary to be able to read and change with usual drawing software. 
     5.It is prohibited to bundle and to open a new panel to the public to my aircraft model. 
         (Please open only the panel to the public. 
          It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
     6.I maintain the copyright of the aircraft model and the panel background. 
     7.The copyright of the gauge belongs to the author. 

---------------------------------------------------------
6. [ About the directions point in FS2004 and FSX]

This aircraft model is made by using FSDS Ver2.24. 
Therefore, it is possible to play basically in FS2004(FS9) and FSX(FS10). 
However........!!
In FS2004.
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode. 
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft. 
Afterwards, if this aircraft is selected, it is normally displayed. 

And........
In FSX.
Because gauges do not correspond to FSX, the gauges in the cockpit are not displayed. 
Please you looks for a suitable gauges and setup Panel.cfg by yourself.
Sorry...............

*******************************************************************
                           Please Notice

I like military aircrafts.  Especially, fighter!!
But, It is because the shape is unique and the manoeuverability is good. 
I like aircraft that can freely fly in the big sky. 
However............I hate war and combatting. 
When I thinks the airframe that I made launches the bullet and the missile, I become scary.
Therefore, I'm prohibiting convert of my airframe for CFS. 
If it is possible, I am wishing my airframe not to be used in CFS. 
Though you might be said "Because it's simulation world".......... 
Please..........Please.......

*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come. 

       KazuIto0926@aol.com

          2016/02/03
          Fukuoka, Japan
*******************************************************************
