FSX  cessna 170B
In 1952, the Cessna 170B was introduced featuring a new wing tapered outboard of the flaps, incorporating dihedral similar to the military version. The B model was equipped with very effective modified Fowler (slotted, rearward-traveling) wing flaps which deflect up to 40 adapted from the C-305/Bird Dog, a wing design that lives on in the Cessna light singles of today (constant NACA 2412 section with a chord of 64 inches (1,600 mm) from centerline to 100 inches (2,500 mm) (the outboard end of the flaps), then tapering to 44-inch (1,100 mm) NACA 2412 section chord at 208 inches from centerline, with three-degree washout across the tapered section). The 170B model also included a new tailplane, a revised tailwheel bracket, and other refinements over the 170 and 170A. It was marketed in 1952 for $7245.
In 1955, the previously elliptical rear side windows were changed to a more square design.

Installation:
==============
-Unzip " Cessna170b_FSX" into a temporary file and move the "Cessna170b_FSX" folder into the main Aircraft directory.

FEATURES:
1) Animations
Doors and engine cowl : shift-e
Side windows : spoiler key (/)

2) POP-UP PANELS : Note - this model does not include a 2D panel
shift-2 : radios
shift-3 : GPS
shift-4 : Nav Enlarge
shift-5 : Compass
shift-6 : Mini Panel

Credits:
========
Special thanks to : 
-GMAX for the drawing program and Microsoft for their makmdls.mdk.
-Alphasim and C Lampard for a beautiful freeware.

LEGAL:
======
This project is released as freeware.  You may modify it and repaint it. You may upload this file to another website as long as it is not for profit.  You need the written permission of the original authors to use any of these files for commercial purposes, otherwise a simple credit would be nice.  This file should not cause any problems with your computer, but I accept no responsibility if you think it does.

Happy Landings!!  

A.F.Scrub
July 2017
Email:  af_scrubbypc@hotmail.com