*******************************************************************************

                  Boulton Paul Sea Balliol T.21

                                 by Kazunori Ito

*******************************************************************************

1.Description of this aircraft
2.Specification
3.About the installation
4.About the operations
5.About free software
6.About the directions point in FS2004

*******************************************************************************

The sexy Boulton Paul Balliol was conceived to meet a UK Air Ministry specification that was drawn up in 1946 for a three-seat turboprop trainer. Boulton Paul designed the airframe before the intended Bristol Mercury radial engine was ready, and so the Balliol also flew equipped with an Armstrong Siddeley Mamba engine. The UK Air Ministry then changed its specification again, and plumped for a two-seat trainer with a Rolls Royce Merlin engine. In all these trials, the Balliol was in competition with the Avro Athena, and the Balliol won. Near to 200 Balliols were built, with some going to Ceylon. The UK version equipped the RAF's Flying Schools until the mid 1950s, when the RAF decided to emphasise jet trainers. Some 30 Balliols were converted to Sea Balliols and served with No. 781 Squadron of the Fleet Air Arm.

--------------------------------------------------
[ Specification ]

Span: 39 ft 4 in (11.98m)
Length: 35 ft 11 in (10.94m)
Height: 12 ft 6 in (3.81m)
Wing Area: 250 sq ft

Empty Weights:  6,730 lb
Loaded Weight: 8,410 lb

Power Plant: One 1,245 hp Rolls-Royce Merlin 35 in nose

Max Speed: 288 mph
Initial Climb: 1,790 ft/min
Service Ceiling: 32,500 ft
Range: 660 miles

Armament :  1* MG 7,7mm, 4* 27kg ext. 

Crew : 3

-----------------------------------------------------------
[ About the installation ]

 The airframe must copy the \Sea Balliol T21 folder as it is in the Aircraft folder of FS2002 or FS2004. 

     \FS2002(FS2004)
        -----\Aircraft
          ---------\Sea Balliol T21
 

Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004. 
 A general gauge is saved for the gauge bundled this time. 
 The Gauges of kingair,Beech_Baron and GPS are not bundled. 
 Please set up it by yourself.

-----------------------------------------------------------
[ About the operations ]

   Shift+"E" = Canopy Open/Shut

  ................................
  !! A special key operation !!
  ................................

  Tail Hook Key ("K") = Tail Hook Down/Up
    "K" is an arbitrary key that you are setting as Tail Hook key. 

  Wingfold Key ("B") = Wingfold Down/Up
    "B" is an arbitrary key that you are setting as Wingfold key. 

 ************************************************************
 * for special key operation,                               *
 * It is likely not to operate according to a set method of *
 * your FS or the state of other Add-on tool.               *
 ************************************************************

-----------------------------------------------------------
[ About free software ]

 All aircraft that I made are free software. 
 The reprint and the repaint may go freely. 
 However, please defend the following conditions. 

     1.The change in contents of this file is prohibited. 
         (Please distribute it like the Zip file of the current state when distributing it. )
     2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model. 
     3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public. 
         (Please open only the texture to the public. )
     4.Don't use DXT format for making texture.
       Please make it by the format that everyone can change. 
       It is necessary to be able to read and change with usual drawing software. 
     5.It is prohibited to bundle and to open a new panel to the public to my aircraft model. 
         (Please open only the panel to the public. 
          It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
     6.I maintain the copyright of the aircraft model and the panel background. 
     7.The copyright of the gauge belongs to the author. 

---------------------------------------------------------
[ About the directions point in FS2004 ]

This aircraft model is made by using FSDS Ver2.24. 
Therefore, it is possible to play basically in FS2004(FS9). 
However........!!
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode. 
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft. 
Afterwards, if this aircraft is selected, it is normally displayed. 

*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come. 

       KzIT16643VT@aol.com

          2006/04/17
          Fukuoka, Japan
*******************************************************************
